nuxbmc

Unofficial fork of OSMC for the Nuxii box.
IR receiver, Leds and Rotary Encoder work out of the box. Use the script.xbmc.nuxii addon to work.

SAMBA protocol installed.
Background changed.
Confluence default skin.
Configured for France.
Added pigpiod. Please note that pigpiod may conflict with clock peripheral. When i2s-DAC available( pigpiod uses PWM). Else, it uses PCM.

Default pins:
IR/LED Module
IR Out: GPIO 17 | Pin 11
Report to IR Receiver Model Specs
LED1 : GPIO 27 | Pin 13
LED2 : GPIO 22 | Pin 15
Rotary Encoder Module:
PEC12 A : GPIO23 | Pin 16
PEC12 B : GPIO 24 | Pin 18
PEC12 1 : GPIO 25 | Pin 22

LED1 ON when SCREENSAVER
LED2 ON when PLAY

Pins can be changed on module “script.xbmc.nuxii” configuration page (located in Service category)
MicroSD cards should be expanded after installation.

Win:Use Win32Disk Imager to burn img file to your microSD card.
Unix: Use dd command [syntax dd if=/path/to/img of=/dev/sdx (adapt to your microSD device)]

You’re probably paying too much for cell phone service. Wirefly compares hundreds of plans to help you save. Enter what you need (minutes, data, texts) into Wirefly’s innovative plan comparison tools and see your savings instantly.